![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Product Details as below:
Application: Mainly used for vehicle management and location tracking services.
OBD compatibility
1. Protocol compatibility
The product supports existing OBD protocol:
* SAE J1850 PWM
* SAE J1850 VPW
* ISO 9141-2
* ISO 14230-4 (KWP2000_5BPS)
* ISO 14230-4 (KWP2000_FAST)
* ISO 15765-4 (CAN500_11BIT)
* ISO 15765-4 (CAN500_29BIT)
* ISO 15765-4 (CAN250_11BIT)
* ISO 15765-4 (CAN250_29BIT)
NOTE: After successfully inserting OBD interface of the car, it will automatically search for a matching protocol, both green light and blue light flash quickly for 5 times indicates that the match is successful.
2. Vehicle Compatibility
Applies to all vehicles which are compatible with OBDII (Including, but not limited to the following models)
* US-produced gasoline vehicles are sold after 1996; all Chinese domestic car are sold after 2003;
* European gasoline vehicles are sold after 2001 or are produced after 2000; Diesel vehicles are sold after 2004 or are produced after 2003.
Support vehicle models:
|
No.
|
Model
|
No.
|
Model
|
No.
|
Model
|
No.
|
Model
|
|
1
|
Mercedes-Benz
|
2
|
BMW
|
3
|
Audi
|
4
|
Land Rover
|
|
5
|
Buick
|
6
|
Chevrolet
|
7
|
Ford
|
8
|
Honda
|
|
9
|
TOYOTA
|
10
|
Volkswagen
|
11
|
Hyundai
|
12
|
SSANG YONG
|
|
13
|
Citroen
|
14
|
Mazda
|
15
|
subaru
|
16
|
Roewe
|
|
17
|
Peugeot
|
18
|
Chery
|
19
|
Cadillac
|
20
|
JINBEI
|
|
21
|
Haima
|
22
|
Kia
|
23
|
BYD
|
24
|
SKODA
|
|
25
|
FAW
|
26
|
Nissan
|
27
|
Geely
|
28
|
JMC
|
|
29
|
Dongfeng
|
30
|
MITSUBISHI
|
31
|
Porsche
|
32
|
Suzuki
|
|
33
|
Soueast
|
34
|
Isuzu
|
35
|
Acura
|
36
|
|
Main Functions (3G GPS Tracker compatible with 2G Network):
1. Request for OBD data by SMS
Send sms command “obdmsg+password” to gps device, below information will be returned:
863070010034246 15 digital IMEI No.
T: 05/21/13 15:25:50 Time
ODO: Accumulative mileage
FLI: Remaining fuel
AF: Average Fuel
Dtime: Driving time
Speed: Speed
Pload: Power load
TEMP: Water temperature
ATP: Throttle percentage
RPM: Engine speed
BAT: Battery voltage
DTC: Diagnostic trouble code
For “Cumulative mileage, remaining fuel, average fuel consumption”, tracker will identify intelligently and display it if vehicle protocol supports, otherwise, no “ODO, FLI” in the message.
If it supports “cumulative mileage”, then you can set the travelled mileage; if it supports “remaining fuel”, then you can set fuel tank volume.
The “average fuel” means the average fuel consumption of 100km; it will be showed only after driving 10km at least.
2. Set mileage: Send SMS “ODO+password+space+100000”, mileage units is kilometre, tracker will reply “Set ODO ok!” after succeed. Device will automatically add this travelled mileage in the value of cumulative mileage.
3. Set Fuel tank volume: Send SMS “tank+password+space+60”, fuel tank volume in litres（L), Tracker replies “Set tank ok! “after succeed . The default fuel tank volume is 60 litres.
4. Notification of Vehicle fault: When a vehicle malfunction, the vehicle malfunction indicator light is on, diagnostic trouble code will be automatically sent to the authorization number.
If in GPRS mode, Device will report to server centre every time when vehicle starts, and only one notification in SMS mode.
5. Vehicle maintenance notification: Send SMS “service123456 365d 10000”, tracker replies “service ok!” after succeed, when the travelled mileage over 10,000 kilometres, or when the device accumulated 350 days of work, it will send maintenance notice to the authorized numbers15 days in advance. If in GPRS mode, Device will report to server centre every time when vehicle starts, and only one notification in SMS mode.
6. Single Locating :
* If there has any authorized numbers been set up, tracker will reply to all calls with location report. If the authorized numbers been set up, then only authorized numbers will be able to receive location report from the tracker;
* Dialing the tracker device from the authorized numbers, it will hang up the call and respond a message with google map link and real-time latitude and longitude ;
* When lost fix to satellites (no GPS signals), it will track by LBS / CELL-ID. Then the replied SMS will include two positions:
– GPS coordinates of the last known position.
– LAC code. Open www.gpstrackerxy.com find “manual track”, and put the received code in LAC and Cell-ID fields to location by LBS technology.
7. Auto track continuously:
* Track with limited times upon time interval, for example send SMS command “fix030s005n +password” to the tracker device, it will report the position information with 30s interval 5 times.
* Track with unlimited times upon time interval, for example send SMS “fix030s030m***n+password” to the tracker. Tracker will report a real-time location every 30 seconds when ACC is ON, and report location every 30 minutes when ACC is OFF. Note: The interval must not less than 10s.
* Smart track upon time and distance interval, this function means that the device can be tracked by preset distance and time interval two factors.
8. Turning points update automatically: the tracker will update the position information automatically to web server once the vehicle changing driving direction over pre-set angle value to form a smooth trajectory consistent with the actual road, this function works only in GPRS mode.
9. GPS drift suppression: this function is deactivated as default, send “suppress+password” to tracker, it will reply “suppress drift ok”. The GPS data stop updating if vehicle is not driving (ACC is OFF) and latitude and longitude always keep the same, and GPS data updates automatically when vehicle is moving (ACC is ON).
10. Location based service (LBS) / Cell-ID Locating:If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID GSM locating. Location reports will include the GPS coordinates of the last known positions as well as a LAC code, Entering the LAC code to the “Manual Track” menu of web tracking platform www.gpstrackerxy.com will enable you to see the tracker’s current location. You can also send command “address+password” to the tracker to request exact address, track will automatically switch to tracking by LBS in GPRS mode. Accuracy of LBS depends on the distance to the nearest GSM Network Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of GSM network. It may not be available in some areas.
11. Exact street address:You must set up the APN of your local GSM network for the SIM card in tracker first before using this function;After configured the APN, send “address+password” to device, it will reply SMS including exact street address. For example: No.8, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china.
12. Voice Monitor :The command to switch between Track and Monitor mode are “tracker” and “monitor”. The default mode is “track” (Track mode).
* Send SMS “monitor+password” to the unit, and it will reply“monitor ok!” and switch to “monitor” mode.
* Send SMS “tracker+password” to the unit, it will reply “tracker ok!” and restore to “track” mode.
13. Data Logging:
*Auto logging: When the tracker device lost GSM signals or fall offline from GPRS, tracker will log the tracking position and alerts automatically in the SD card on the basis of the pre-set condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring platform (server), but the logged tracking data should be loaded to the monitoring platform via SMS command.
*It depends on the capacity of the SD card inserted in the tracker device.
* The logged data in SD card can be copied to computers, and then the data route can be checked by importing data in the menu “Data Import” of web platform www.gpstrackerxy.com
14.Data Load:
*Current date Load: send SMS: “load+ password” to tracker device, it will reply: “load ok” if the device is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does not work under GPRS mode.
*Specified date Load: send SMS: “load+ password+ space+ year month date” to tracker device, it will reply: “load ok” and load the tracking data to the web platform upon the valid time you choose. For Example: send SMS: “load123456 20110425” to the tracker device, means to load the tracking data of 25th April 2011 to web platform.
15. Decide how many times of alarm message:you can decide how many times of the alarm message to be sent, For those alarm message sent in cycle, you can limit the times the alarm message to be sent. For example, send SMS “ xtime+password+005 “ to tracker, alarm message will be sent 5 times once alarms are triggered.
16. Multiple Alarms:
* SOS Emergency Alarm:long-press SOS button on the cables for 3 seconds, the device will send sms: “help me + lat/long” to every authorized number at interval of 3 minutes. No beeps from siren. Alerts will be stopped after received “help me” from any authorized phone number.
* Low battery alarm:the tracker will send SMS “low battery+latitude/longitude” to authorized numbers 2 times in total at 15 minutes interval when voltage of battery is going to be about 3.55V.
* External power off alarm:it will send SMS “power alarm+latitude/longtitude” to authorized numbers every 3 minutes when external power is cut off.
* GPS Blind Spot Alert:it will send alert SMS “no gps+last valid latitude/longitude before lost GPS signal”.
* Geo-fence:set up a geo-fence for the tracker device to restrict its movements within a district. The unit will send SMS to the authorized numbers when it goes out of this district
* Multi-area management:5 areas can be set up at most. The distance between two points can’t be less than the total distance in the 2 commands, and different areas can’t cover each other
* Movement Alarm:with GPS signal reception, after the unit stayed immobile in a place for 3-10 minutes, user can set the movement alarm, for example, send SMS “move+password+space+0200” to the tracker (Suppose area of a radius of 200 meters, it supports 4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a movement (the default distance is 200m), it will send SMS “Move+ latitude & longitude” to the authorized numbers.
* Overspeed Alarm:for example, if you want to set the alarm speed as 80km/h, then when the target moves exceeding 80km/h, the unit will send SMS “speed+080!+ latitude & longitude” to the authorized numbers. it will send only one SMS in 3 minutes in SMS mode when overspeed, the siren will beep 1 time when overspeed 1 time.
17.Set up arm/disarm by SMS
* Arm/lock:send SMS command “arm+password” to the tracker, the terminal of vehicles will change to arm state, Meanwhile, car door is locked, and it will reply SMS “Tracker is activated”. If the vehicle are in ignition state (ACC is ON), car door will be locked, but ARM will fail, Meanwhile, it will reply SMS “set up fail! pls turn off ACC”. If engine is off, but door is open, then the car can’t enter ARM state and reply “setup fail, pls close the door.”
* Disarm/Unlock:send SMS command “disarm+password” to the tracker device in the vehicle, It will reply “Tracker is deactivated” in both armed and disarmed state, and the SMS command will make the tracker device enter into disarmed state if the unit currently armed. It won’t alarm if the door is open and sensor is vibrated and the engine is started when deactivated this arm function.
18. Alarms under Arm State:
* ACC Alarm:the unit will send SMS “ACC alarm+lat/long” to the authorized number in at interval of 3 minutes when the engine of the car is turned on, that is the key is rotated to “ACC ON” position to start the car in arm state; Siren will be sound for 20 seconds, and repeat again at interval of 20 seconds if the ACC always keep ON. Disarm to stop this alarm.
* Built in Acceleration Sensor Alarm:The tracker is built in three axis acceleration sensor, the tracker can detect it in arm state when the vehicle move, tilt or shock. The alarm way is same as the external shock sensor alarm.
19. Sleep Mode:when vehicle is not driving (ACC is OFF), GSM module fall asleep; GPS module shut off; and tracker works in low power consumption. Calling, SMS command and any triggered alarm can wake up it.It can sleep by time, sleep by shock and can start work at specific time.
20. Forward the third parties’ message:for example, set the phone number of the service provider of the SIM card in the tracker, when charge remind message coming in, tracker will forward it to authorized phone number. Only 1 third parties phone number can be set up at most.
21. SIM card Balance Inquiry:How it works: take China Mobile as example, After accept balance command, tracker will remember the “mobile phone number”, carrier’s phone number and the code, then send the code to carrier’s phone number, and forward the message from carrier to mobile phone number.
22. Check the Vehicle State:send SMS command “check+password” to the tracker in the vehicle, It will reply SMS including:external power、battery、GPS signal、ACC、Door、GSM signal、GPRS status、APN、UP、IP、PORT etc.
23. Terminal (local) Time Setting:for example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is minus, send SMS “time zone123456 -8”.
24. Reset Hardware:send SMS “reset+password” to tracker device to reset the GSM module and GPS module of the tracker device, it will reply “reset ok”.
25. Less GPRS traffic:tracker will change to less GPRS traffic mode after parking 5 minutes (ACC is OFF), GPRS disconnect and connect again when alarm being triggered or vehicle starts driving.
Specifications:
|
Content
|
Specifications
|
|
Model
|
TK306-3G
|
|
Dimension
|
64.5×50×27mm
|
|
Weight
|
60g
|
|
Network
|
GSM/GPRS
|
|
Band
|
3G WCDMA: 850/1900/2100MHz, 2G GSM: 850/900/1800/1900Mhz
|
|
GPS Sensitivity
|
-165dBm
|
|
GPS Accuracy
|
5m
|
|
LBS Accuracy
|
100-2000m
|
|
GPS Start Time
|
Cold status 30s
Warm status 11s
Hot status 1s
|
|
Backup Battery
|
Chargeable changeable 3.7V 200mAh Polymer Li-Battery
|
|
Storage Temperature
|
-40°C to +85°C
|
|
Operation Temperature
|
-20°C to +70°C
|
|
Humidity
|
5%–95% non-condensing
|
|
Special Features
|
OBDII Port Direct Charge; Voice Monitor; OBD Data Read; Realtime Tracking
|
